// Industries / Automotive Fibreglass

Automotive Fibreglass

Automotive Fibreglass

Automotive fibreglass for automotive and motorsport, from body panels and bodywork to tooling, moulds and lightweight race parts, made to your design.

Fibreglass Body Panels · Tooling & Moulds · Motorsport

1999

Established

Australian

Owned & operated

In-house

Design to delivery

1–1000s

Prototype to production

At a glance

  • Sector: Automotive & Motorsport

  • Applications: Panels, Tooling, Parts

  • Materials: Fibreglass, Carbon

  • Processes: Lay-Up, Infusion, RTM

  • Finish: Lightweight, Finished

// Capability

Automotive fibreglass, end to end

We manufacture automotive fibreglass for automotive and motorsport, from production body panels to one-off race parts and tooling.

Automotive and motorsport work demands parts that are light, strong and precisely shaped. Automotive fibreglass moulds into body panels, bodywork and aero, while fibreglass tooling and patterns make short runs and prototypes fast and affordable.

Built to suit your build

As an Australian owned manufacturer based in Adelaide, we handle design, tooling and manufacture in-house and hold it to schedule, from a single prototype panel through to a production run of parts.

// What we make

Automotive fibreglass, and more

Automotive fibreglass for body panels and bodywork, plus the tooling and custom parts that go with it.

Body panels & bodywork

01

Bonnets, guards, spoilers, valances and full body panels moulded to fit any make or model, in glass or carbon.

Tooling & moulds

02

Fibreglass tooling, moulds, plugs and patterns for short production runs and repeatable, accurate parts.

Motorsport parts

03

Lightweight race bodywork, splitters, diffusers and aero parts that trim weight and add downforce on track.

Custom & prototype

04

One-off, custom and prototype parts made to your design, from a quick concept through to a finished component.

// What we make

Automotive fibreglass, and more

Automotive fibreglass for body panels and bodywork, plus the tooling and custom parts that go with it.

Body panels & bodywork

01

Bonnets, guards, spoilers, valances and full body panels moulded to fit any make or model, in glass or carbon.

Tooling & moulds

02

Fibreglass tooling, moulds, plugs and patterns for short production runs and repeatable, accurate parts.

Motorsport parts

03

Lightweight race bodywork, splitters, diffusers and aero parts that trim weight and add downforce on track.

Custom & prototype

04

One-off, custom and prototype parts made to your design, from a quick concept through to a finished component.

// Why composites

Why fibreglass on road & track

Automotive fibreglass does four things steel and aluminium cannot.

Lightweight

Less weight for more speed, payload and fuel economy on road and track.

Mouldable

Almost any panel or body shape, moulded in one seamless piece.

Strong

High strength-to-weight ratio for high-stress, high-load and impact parts.

Fast tooling

Quick, affordable moulds for short runs, prototypes and one-offs.

// Materials & methods

The right material, the right process

Panels and tooling get the material and process matched to the part, from glass body panels to carbon race parts.

Materials

  • Fibreglass (E-glass): Tough, Light and Cost-Effective Panels.

  • Carbon Fibre: Maximum Strength-to-Weight for Race Parts.

  • Vinyl Ester Resin: Added Strength and Heat Resistance.

  • Gelcoat Finishes: Smooth, Paint-Ready or Finished Surfaces.

Processes

  • Hand Lay-Up: Panels, Bodywork and Tooling.

  • Vacuum Infusion: Light, Consistent Structural Parts.

  • RTM & Closed Moulding: Repeatable Production Parts.

  • In-House Tooling: Moulds and Patterns Made and Held on Site.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so an automotive project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so an automotive project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// Quality & assurance

Made to your specification

A single point of accountability from first drawing to finished part, with the work kept in Australia.

  • Australian Owned: Owned and Operated in Australia, Manufacturing Locally in Adelaide.

  • In-House Control: Design, Tooling and Manufacture under One Roof, with One Team Accountable.

  • To Your Standard: Built to Your Drawings, Specification and the Standards Your Program Requires.

  • Prototype To Production: From a Single Proof-of-Concept Part Through to an Ongoing Production Run.

// Start here

Got a drawing?

Let’s make it.

Talk to the workshop

08 8345 2299