// Products / Flat Wall & Floor Panels

Flat Wall & Floor Panels

Flat Wall & Floor Panels

Lightweight fibreglass composite panels, cut to your sizes, for walls and floors where corrosion resistance or insulation properties matter.

fibreglass composite panels · fibreglass panels · cut to size

1999

Established

Australian

Owned & operated

In-house

Design to delivery

1–1000s

Prototype to production

At a glance

  • Product: Composite panels

  • Use: Walls & floors

  • Materials: Fibreglass, GRP, cored

  • Finish: Smooth, hygienic

  • Service: Made, cut to size

flat wall & floor fibreglass panel

// Product

Composite panels, cut to your sizes

We make custom fibreglass panels in-house and source flat sheets to suit your project, with sizes and finishes confirmed before quoting.

Our planned flat-sheet range is 2500 × 1200 mm in 3 mm and 5 mm thicknesses, with white gelcoat on one face and raw fibreglass on the reverse. Sheets may be imported or made in-house; availability will be confirmed when you enquire.

Cut and finished to suit

Smaller sheet sizes are available on request. Custom-made or out-of-stock sheets typically take about 2–4 weeks, depending on quantity and material availability.

// What we make

Panels for walls and floors

Planned flat sheets in 3 mm and 5 mm, plus custom foam-core panels and other options subject to project requirements.

flat wall & floor fibreglass panel
Wall & ceiling panels

Hygienic, wipe-clean wall and ceiling linings for clinical, food and wet areas, sealed against moisture and easy to clean.

flat wall & floor fibreglass panel
Floor panels

Strong, non-slip composite floor panels that carry load and shrug off wear, chemicals and constant wash-down.

flat wall & floor fibreglass panel
Insulated & cored

Foam-core panels are generally custom made. Our usual in-house size is around 1500 × 1000 mm or smaller; larger panels may be sourced to suit the project.

flat wall & floor fibreglass panel
Cut to size

Panels cut, trimmed and edge-finished to your drawings, delivered ready to fix straight to the structure.

// Why composites

Why composite panels

Composite panels do four things steel and timber cannot.

Lightweight

Easy to handle, cut and install with basic site tools, by hand.

Hygienic

Smooth, sealed, wipe-clean surfaces that resist moisture and bacteria.

Corrosion-proof

No rust or rot in wet, washed-down or chemical areas, year after year.

Insulating

Thermal and electrical insulation built into the panel itself.

// Materials & methods

The right material, the right process

We help match the sheet or custom panel construction, thickness and finish to the job.

Panel build

flat wall & floor fibreglass panel

Solid

single skin

flat wall & floor fibreglass panel

Cored

foam core

flat wall & floor fibreglass panel

Insulated

hatched

flat wall & floor fibreglass panel

Anti-slip

gritted

Materials

  • Fibreglass & GRP: tough, corrosion-proof faces.

  • Cored panels: foam or balsa cores for stiffness.

  • Gelcoat finishes: smooth, sealed, hygienic surfaces.

  • Anti-slip floors: gritted faces for safe footing.

Processes

  • Lamination: flat panels pressed to thickness.

  • Cut to size: panels cut and prepped to your drawings.

  • Edge trims: trims, joints and fixings added.

  • In-house finishing: faces and finishes to suit the area.

// How we work

Design through to deliver

We make custom panels in-house and source other sheets where needed. We confirm the appropriate construction, size and supply route for each project.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Custom panels are made in-house to the agreed specification; sourced sheet specifications are confirmed before supply.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// How we work

Design through to deliver

We make custom panels in-house and source other sheets where needed. We confirm the appropriate construction, size and supply route for each project.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Custom panels are made in-house to the agreed specification; sourced sheet specifications are confirmed before supply.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// Quality & assurance

Made to your specification

One Australian point of contact for specifications and delivery, whether a panel is made in-house or sourced for your project.

  • Australian owned: Australian owned, with custom manufacturing in Adelaide and sourced sheet options.

  • Project coordination: Our team coordinates design, manufacturing or sourcing, specifications and delivery.

  • To your standard: Built to your drawings, specification and the standards your program requires.

  • Prototype to production: From a single proof-of-concept part through to an ongoing production run.

// Start here

Got a drawing?

Let’s make it.

Talk to the workshop

08 8345 2299

// FAQ

Common questions

Wall, ceiling and floor panels in fibreglass and composite, including solid, cored, insulated and anti-slip builds, cut and finished to your drawings.

They do not rust or rot in wet, washed-down or chemical areas, are lightweight and easy to install, and offer hygienic, wipe-clean surfaces with built-in thermal and electrical insulation.

Yes. Smooth, sealed, wipe-clean surfaces resist moisture and bacteria, which suits clinical, food and wet environments with constant wash-down.

Yes, subject to sheet and manufacturing-table dimensions. For larger panels, a join or sourced sheet may be possible depending on the application; we confirm feasibility before quoting.

We make custom panels in-house in Adelaide and also source flat sheets, including imported options. We confirm the origin and specification for each order.