// Industries / Civil & Infrastructure Fibreglass

Civil & Infrastructure Fibreglass

Civil & Infrastructure Fibreglass

Civil and infrastructure fibreglass, from trench covers and FRP grating to bridge decking, walkways and cable management, built to outlast steel and concrete.

Fibreglass Trench Covers · FRP Grating · Pultruded Profiles

1999

Established

Australian

Owned & operated

In-house

Design to delivery

1–1000s

Prototype to production

At a glance

  • Sector: Civil & Infrastructure

  • Applications: Trench Covers, Decking

  • Materials: Pultruded, Fibreglass

  • Processes: Pultrusion, Moulding

  • Finish: Non-Slip, Non-Conductive

// Capability

Civil & infrastructure fibreglass, end to end

We supply and manufacture civil and infrastructure fibreglass, built to last without the endless maintenance steel and concrete demand.

Roads, rail and public infrastructure need parts that last. Civil and infrastructure fibreglass is light enough to lift by hand, non-conductive and corrosion-proof, so trench covers, grating and decking outlast steel and concrete on cable trenches, pits and channels.

Built to suit your job

As an Australian owned manufacturer based in Adelaide, we handle design, fabrication and manufacture in-house and hold it to schedule, from a single trench run through to a full project.

// What we make

Civil & infrastructure fibreglass, and more

Civil and infrastructure fibreglass for trenches and channels, plus the grating, decking and access componentry that goes with it.

Trench & pit covers

01

Light, lockable fibreglass trench covers and pit lids that lift by hand and never get stolen for scrap value.

Bridge decking

02

Structural FRP decking and pultruded profiles for bridge spans, walkways, platforms and boardwalks.

Grating & walkways

03

Non-slip grating, walkways, stair treads and handrails for safe public access in all weather.

Cable management

04

Cable trays, ducts, pits and cable-management systems for rail, power and telecom networks.

// What we make

Civil & infrastructure fibreglass, and more

Civil and infrastructure fibreglass for trenches and channels, plus the grating, decking and access componentry that goes with it.

Trench & pit covers

01

Light, lockable fibreglass trench covers and pit lids that lift by hand and never get stolen for scrap value.

Bridge decking

02

Structural FRP decking and pultruded profiles for bridge spans, walkways, platforms and boardwalks.

Grating & walkways

03

Non-slip grating, walkways, stair treads and handrails for safe public access in all weather.

Cable management

04

Cable trays, ducts, pits and cable-management systems for rail, power and telecom networks.

// Why composites

Why fibreglass beats steel and concrete

Civil and infrastructure fibreglass does four things steel and concrete cannot.

Lightweight

One person can lift and place covers that steel needs a crew and a crane for.

Non-conductive

Safe around rail traction, power cabling and live electrical equipment.

Corrosion-proof

No rust or rot, so decades of service with very little upkeep.

Anti-theft

No scrap value, unlike steel or copper covers, so theft is not an issue.

// Materials & methods

The right material, the right process

Covers and profiles get the material and process matched to the load, from light pedestrian covers to trafficable decks.

Materials

  • Pultruded Profiles: High Strength over Long Spans.

  • Fibreglass (E-glass): Tough, Corrosion-Proof and Cost-Effective.

  • Phenolic Options: Fire-Rated Systems Where Required.

  • Anti-Slip Topping: Gritted Surface for Safe Footing.

Processes

  • Pultrusion: Strong, Consistent Profiles and Covers.

  • Moulded Grating: Non-Slip, Free-Draining Panels.

  • Custom Fabrication: Cut and Built to Your Layout.

  • In-House Tooling: Moulds and Patterns Made and Held on Site.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so an infrastructure project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so an infrastructure project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// Quality & assurance

Made to your specification

A single point of accountability from first drawing to finished part, with the work kept in Australia.

  • Australian Owned: Owned and Operated in Australia, Manufacturing Locally in Adelaide.

  • In-House Control: Design, Tooling and Manufacture under One Roof, with One Team Accountable.

  • To Your Standard: Built to Your Drawings, Specification and the Standards Your Program Requires.

  • Prototype To Production: From a Single Proof-of-Concept Part Through to an Ongoing Production Run.

// Start here

Got a drawing?

Let’s make it.

Talk to the workshop

08 8345 2299