// Products / Electrical Pit Boxes

Electrical Pit Boxes

Electrical Pit Boxes

Composite electrical pit boxes and enclosures for power, telecom and infrastructure networks, built non-conductive, non-corrosive and tough underground.

electrical pit box · composite enclosures · non-conductive

1999

Established

Australian

Owned & operated

In-house

Design to delivery

1–1000s

Prototype to production

At a glance

  • Product: Pit boxes & enclosures

  • Networks: Power, telecom, infra

  • Materials: Fibreglass, GRP

  • Properties: Non-conductive

  • Service: Made to order

// Product

Pit boxes and enclosures, made to order

We manufacture composite electrical pit boxes and enclosures for power, telecom and infrastructure networks.

Buried electrical assets need housings that do not rust, conduct or rot. Our composite pit boxes and enclosures are non-conductive, corrosion-proof and load-rated, made to your dimensions for cable pits, junctions and equipment.

Made to your dimensions

From standard pits to bespoke enclosures, we mould and fabricate to your size, load rating and fit-out, ready to install on the network.

// What we make

Boxes and enclosures

Pit boxes, lids and enclosures moulded and fabricated to suit the network.

Cable pit boxes

In-ground pits for cable, power and comms networks, non-conductive and corrosion-proof for years in the ground.

Equipment enclosures

Housings, cabinets and enclosures for field equipment, sealed against dust, water and the weather.

Lids & covers

Load-rated lids and access covers engineered for footpath, light or heavy traffic, light enough to lift by hand.

Custom enclosures

Bespoke boxes built to your size, load rating and fit-out, with cut-outs, glands and fittings added in-house.

// Why composites

Why composite enclosures

Composite pit boxes do four things steel and concrete cannot.

Non-conductive

Electrically and thermally insulating, so buried assets stay isolated.

Corrosion-proof

No rust underground or in wet, dirty pits where metal breaks down.

Lightweight

Easy to handle, lift and install on site without cranes or heavy lifting gear.

Load-rated

Engineered and lid-rated for traffic, footfall and site loads.

// Materials & methods

The right material, the right process

Each box gets the laminate and lid rating matched to its load and location.

Box sizes

Small

compact

Medium

standard

Large

heavy duty

Custom

to spec

Materials

  • Fibreglass & GRP: tough, non-conductive, corrosion-proof.

  • Vinyl ester resin: extra chemical resistance.

  • UV-stable gelcoat: surfaces that last outdoors.

  • Load-rated lids: classes to suit traffic and footfall.

Processes

  • Moulding: boxes, lids and enclosures to shape.

  • Fabrication: cut-outs, glands and fittings added.

  • Custom sizing: built to your dimensions and rating.

  • In-house tooling: moulds and patterns held on site.

// How we work

Design through to deliver

Every step under one roof in Adelaide, so a pit-box order moves from drawing to install-ready without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Pit boxes and enclosures moulded to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// How we work

Design through to deliver

Every step under one roof in Adelaide, so a pit-box order moves from drawing to install-ready without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Pit boxes and enclosures moulded to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// Quality & assurance

Made to your specification

A single point of accountability from first drawing to finished part, with the work kept in Australia.

  • Australian owned: Owned and operated in Australia, manufacturing locally in Adelaide.

  • In-house control: Design, tooling and manufacture under one roof, with one team accountable.

  • To your standard: Built to your drawings, specification and the standards your program requires.

  • Prototype to production: From a single proof-of-concept part through to an ongoing production run.

// Start here

Got a drawing?

Let’s make it.

Talk to the workshop

08 8345 2299