// Industries / Water Fibreglass

Water Fibreglass

Water Fibreglass

Water fibreglass for the water and wastewater sector, from FRP grating and tanks to covers, weirs and walkways, where corrosion resistance is the whole story.

Water Bibreglass · FRP Grating · Corrosion-Proof

1999

Established

Australian

Owned & operated

In-house

Design to delivery

1–1000s

Prototype to production

At a glance

  • Sector: Water & Wastewater Fibreglass

  • Applications: Grating, Tanks, Covers

  • Materials: Fibreglass, GRP

  • Processes: Moulded & Pultruded

  • Finish: Non-Slip, Corrosion-Proof

// Capability

Water fibreglass, end to end

We supply and manufacture water fibreglass for the water and wastewater sector, built to handle constant moisture, chemicals and corrosion.

Treatment plants and water networks live in wet, aggressive conditions that rust steel and rot timber. Water fibreglass does not corrode, stays non-slip when wet and lasts for decades with little upkeep, from grating and covers through to tanks and weirs.

Built to suit your plant

As an Australian owned manufacturer based in Adelaide, we handle design, fabrication and manufacture in-house and hold it to schedule, from a single walkway through to a full treatment-plant fit-out.

// What we make

Water fibreglass, and everything around it

Water fibreglass for treatment-plant walkways and platforms, plus the covers, tanks and weirs that go with it.

FRP grating & walkways

01

Non-slip fibreglass grating, walkways and platforms over channels, tanks, sumps and wet process areas, indoors and out.

Pit & tank covers

02

Pump-station, pit and access covers that lift easily by hand and never rust, rot or seize shut over time.

Tanks & weirs

03

Storage and process tanks, weirs, baffles, launders and troughs in corrosion-proof, chemical-resistant GRP.

Handrails & access

04

Handrail systems, ladders and ladder cages for safe, compliant access across the plant and its structures.

// What we make

Water fibreglass, and everything around it

Water fibreglass for treatment-plant walkways and platforms, plus the covers, tanks and weirs that go with it.

FRP grating & walkways

01

Non-slip fibreglass grating, walkways and platforms over channels, tanks, sumps and wet process areas, indoors and out.

Pit & tank covers

02

Pump-station, pit and access covers that lift easily by hand and never rust, rot or seize shut over time.

Tanks & weirs

03

Storage and process tanks, weirs, baffles, launders and troughs in corrosion-proof, chemical-resistant GRP.

Handrails & access

04

Handrail systems, ladders and ladder cages for safe, compliant access across the plant and its structures.

// Why composites

Why fibreglass wins around water

Water fibreglass earns its place in treatment plants for four reasons steel and timber cannot match.

Corrosion-proof

No rust or rot in constant moisture, effluent and chemicals.

Non-slip

Safe footing on wet, greasy plant walkways and platforms.

Long life

Decades of service with minimal maintenance or replacement.

Lightweight

Easy to lift, cut and install over open channels and tanks.

// Materials & methods

The right material, the right process

Grating, covers and tanks get the resin and profile matched to the chemistry and load of the plant.

Materials

  • Fibreglass (E-Glass): Tough, Corrosion-Proof and Cost-Effective.

  • Vinyl Ester Resin: Extra Chemical and Effluent Resistance.

  • Phenolic Options: Fire-Rated Grating Where Required.

  • Hybrid Laminates: Blended Fibres for High-Load Areas.

Processes

  • Moulded Grating: Non-Slip, Free-Draining Panels.

  • Pultruded Grating: High Load Capacity over Long Spans.

  • Custom Fabrication: Cut and Built to Your Plant Layout.

  • In-House Tooling: Moulds and Patterns Made and Held on Site.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so a treatment-plant project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so a treatment-plant project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// Quality & assurance

Made to your specification

A single point of accountability from first drawing to finished part, with the work kept in Australia.

  • Australian Owned: Owned and Operated in Australia, Manufacturing Locally in Adelaide.

  • In-House Control: Design, Tooling and Manufacture under One Roof, with One Team Accountable.

  • To Your Standard: Built to Your Drawings, Specification and the Standards Your Program Requires.

  • Prototype To Production: From a Single Proof-of-Concept Part Through to an Ongoing Production Run.

// Start here

Got a drawing?

Let’s make it.

Talk to the workshop

08 8345 2299