// Products / Fibreglass Flooring

Fibreglass Flooring

Fibreglass Flooring

High-strength, corrosion-resistant fibreglass flooring and floor panels, built for years of heavy industrial use, wet, chemical or non-slip.

fibreglass flooring · floor panels · non-slip

1999

Established

Australian

Owned & operated

In-house

Design to delivery

1–1000s

Prototype to production

At a glance

  • Product: Flooring & floor panels

  • Use: Industrial floors

  • Materials: Fibreglass, GRP

  • Finish: Non-slip, gritted

  • Service: Made, cut to size

// Product

Flooring built for industrial use

We manufacture fibreglass flooring and floor panels, the high-strength, corrosion-resistant alternative to steel and timber floors.

Industrial floors take a pounding from loads, chemicals and wash-down. Fibreglass flooring shrugs all of it off, staying non-slip, corrosion-proof and strong for years, from mezzanines and walkways to full floor systems.

Built to suit the floor

From a single panel to a full floor system, we make flooring to your spans, loads and finish, and cut it to fit your layout.

// What we make

Flooring for tough floors

Composite floor panels and systems, made to your spans, loads and finish.

Floor panels

Strong, non-slip composite floor panels that carry heavy loads and resist wear, chemicals and wash-down.

Mezzanines & platforms

Lightweight flooring for mezzanines, platforms and raised structures, easy to install over steel.

Walkways

Corrosion-proof walkway flooring for wet, chemical and outdoor areas where steel and timber fail.

Cut to size

Panels cut, trimmed and finished to your layout, delivered ready to lay and fix on site.

// Why composites

Why fibreglass flooring

Fibreglass flooring does four things steel and timber cannot.

Corrosion-proof

No rust or rot in wet, chemical or wash-down areas, with no coating to maintain.

Non-slip

Gritted surface stays safe underfoot when wet, oily or icy, shift after shift.

High-strength

Engineered for heavy industrial loads and equipment traffic.

Lightweight

Easy to handle, cut and install by hand, with no heavy lifting gear required.

// Materials & methods

The right material, the right process

Each floor gets the panel, thickness and grit matched to its loads and environment.

Surface finish

Gritted

non-slip

Smooth

sealed

Mesh

open

Solid

closed

Materials

  • Fibreglass & GRP: tough, corrosion-proof flooring.

  • Cored panels: stiffness with less weight.

  • Anti-slip topping: gritted surface for safe footing.

  • Vinyl ester resin: added chemical resistance.

Processes

  • Lamination: floor panels pressed to thickness.

  • Cut to size: panels cut and prepped to your layout.

  • Edge trims: trims, joints and fixings added.

  • In-house finishing: grit and finishes to suit the area.

// How we work

Design through to deliver

Every step under one roof in Adelaide, so a flooring package moves from drawing to install-ready without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Composite flooring laminated to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// How we work

Design through to deliver

Every step under one roof in Adelaide, so a flooring package moves from drawing to install-ready without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Composite flooring laminated to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// Quality & assurance

Made to your specification

A single point of accountability from first drawing to finished part, with the work kept in Australia.

  • Australian owned: Owned and operated in Australia, manufacturing locally in Adelaide.

  • In-house control: Design, tooling and manufacture under one roof, with one team accountable.

  • To your standard: Built to your drawings, specification and the standards your program requires.

  • Prototype to production: From a single proof-of-concept part through to an ongoing production run.

// Start here

Got a drawing?

Let’s make it.

Talk to the workshop

08 8345 2299