// Industries / Marine Fibreglass

Marine Fibreglass

Marine Fibreglass

Marine fibreglass for jetties, pontoons and decking, plus marine grade grating, fendering, buoyancy modules and custom marina componentry.

Marine Fibreglass · Marine Grade Grating · Saltwater-Proof

1999

Established

Australian

Owned & operated

In-house

Design to delivery

1–1000s

Prototype to production

At a glance

  • Sector: Marine

  • Applications: Grating, Decking, Pontoons

  • Materials: Fibreglass, Hybrids

  • Processes: Moulded, Fabricated

  • Finish: Non-Slip, Saltwater-Proof

// Capability

Marine fibreglass, end to end

We supply and manufacture marine fibreglass for jetties, pontoons and decks, built to survive constant saltwater immersion.

Nothing tests a material like the sea. Marine fibreglass does not rust or rot, stays non-slip when wet and shrugs off constant saltwater, so jetties, pontoons and decks last for decades where steel and timber fail.

Built to suit your berth

As an Australian owned manufacturer based in Adelaide, we handle design, fabrication and manufacture in-house and hold it to schedule, from a single gangway through to a full marina fit-out.

// What we make

Marine fibreglass, and everything around it

Marine fibreglass for jetties and pontoons, plus the decking, fendering and marina componentry that goes with it.

Marine grade grating & decking

01

Non-slip FRP grating and decking for jetties, gangways, pontoons and boardwalks that stay safe underfoot, year after year.

Pontoons & floats

02

Pontoons, buoyancy modules and floating structures for marinas, ferries, aquaculture and offshore work.

Fendering & hardware

03

Fendering, cleats, bollards, ladders and marina componentry that never rusts or corrodes in saltwater.

Custom fit-outs

04

Hulls, hatches, consoles, tanks and bespoke marine parts moulded to your design and finish.

// What we make

Marine fibreglass, and everything around it

Marine fibreglass for jetties and pontoons, plus the decking, fendering and marina componentry that goes with it.

Marine grade grating & decking

01

Non-slip FRP grating and decking for jetties, gangways, pontoons and boardwalks that stay safe underfoot, year after year.

Pontoons & floats

02

Pontoons, buoyancy modules and floating structures for marinas, ferries, aquaculture and offshore work.

Fendering & hardware

03

Fendering, cleats, bollards, ladders and marina componentry that never rusts or corrodes in saltwater.

Custom fit-outs

04

Hulls, hatches, consoles, tanks and bespoke marine parts moulded to your design and finish.

// Why composites

Why fibreglass wins at sea

Marine fibreglass earns its place on the water for four reasons steel and timber cannot match.

Saltwater-proof

No rust or rot in constant marine immersion, salt spray or splash zones.

Non-slip

Safe footing on wet jetties, gangways and decks all year round.

Lightweight

Easy to handle and install over water, often without heavy lifting gear.

Low maintenance

No painting or galvanising each season, so running costs stay low.

// Materials & methods

The right material, the right process

Marine parts get the material and profile matched to the duty, from light gangway grating to structural pontoons.

Materials

  • Fibreglass (E-glass): Tough, Saltwater-Proof and Cost-Effective.

  • Vinyl Ester Resin: Extra Resistance for Permanent Immersion.

  • Gelcoat Finishes: Durable, UV-Stable Marine Surfaces.

  • Hybrid Laminates: Blended Fibres for Structural Parts.

Processes

  • Moulded Grating: Non-Slip, Free-Draining Decking.

  • Pultruded Grating: High Load Capacity over Long Spans.

  • Custom Fabrication: Cut and Built to Your Layout.

  • In-House Tooling: Moulds and Patterns Made and Held on Site.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so a marine project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so a marine project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// Quality & assurance

Made to your specification

A single point of accountability from first drawing to finished part, with the work kept in Australia.

  • Australian Owned: Owned and Operated in Australia, Manufacturing Locally in Adelaide.

  • In-House Control: Design, Tooling and Manufacture under One Roof, with One Team Accountable.

  • To Your Standard: Built to Your Drawings, Specification and the Standards Your Program Requires.

  • Prototype To Production: From a Single Proof-of-Concept Part Through to an Ongoing Production Run.

// Start here

Got a drawing?

Let’s make it.

Talk to the workshop

08 8345 2299