// Industries / Food & Beverage Fibreglass

Food & Beverage Fibreglass

Food & Beverage Fibreglass

Food and beverage fibreglass, from food-grade FRP grating and hygienic wall panels to tanks, drainage and processing componentry, built for wash-down hygiene.

Food-Grade Grating · Hygienic Panels · Easy-Clean

1999

Established

Australian

Owned & operated

In-house

Design to delivery

1–1000s

Prototype to production

At a glance

  • Sector: Food & Beverage

  • Applications: Grating, Panels, Tanks

  • Materials: Fibreglass, GRP

  • Processes: Moulded, Fabricated

  • Finish: Non-Slip, Food-Grade

// Capability

Food & beverage fibreglass, end to end

We supply and manufacture food and beverage fibreglass, built for wet, wash-down, food-grade hygiene.

Food and beverage plants are washed down constantly with hot water, brine and chemicals. Food and beverage fibreglass does not rust or taint, stays non-slip underfoot and wipes clean, from processing-floor grating through to tanks, panels and drainage.

Built to suit your plant

As an Australian owned manufacturer based in Adelaide, we handle design, fabrication and manufacture in-house and hold it to schedule, from a single processing area through to a full plant fit-out.

// What we make

Food & beverage fibreglass, and more

Food and beverage fibreglass for processing floors and walls, plus the tanks and drainage that go with it.

Food-grade grating

01

Non-slip, hygienic FRP grating for wet processing, wash-down and cold-store floors throughout the whole plant.

Hygienic wall panels

02

Seamless, wipe-clean wall and ceiling linings for processing, packing and cold rooms alike, joint-free.

Tanks & vats

03

Storage, mixing and process tanks and vats in corrosion-proof, food-grade GRP, built to size on order to suit.

Drainage & covers

04

Drains, channels, pit covers and ducting for wash-down and processing areas right across the whole plant.

// What we make

Food & beverage fibreglass, and more

Food and beverage fibreglass for processing floors and walls, plus the tanks and drainage that go with it.

Food-grade grating

01

Non-slip, hygienic FRP grating for wet processing, wash-down and cold-store floors throughout the whole plant.

Hygienic wall panels

02

Seamless, wipe-clean wall and ceiling linings for processing, packing and cold rooms alike, joint-free.

Tanks & vats

03

Storage, mixing and process tanks and vats in corrosion-proof, food-grade GRP, built to size on order to suit.

Drainage & covers

04

Drains, channels, pit covers and ducting for wash-down and processing areas right across the whole plant.

// Why composites

Why fibreglass in food & drink

Food and beverage fibreglass does four things steel cannot.

Food-grade

Non-tainting, hygienic surfaces safe near food and drink, every batch.

Non-slip

Safe footing on wet, greasy processing floors, shift after shift.

Corrosion-proof

No rust in wash-down, brine, sugars and acids over the years.

Easy-clean

Smooth, sealed surfaces that hose down fast between runs and shifts.

// Materials & methods

The right material, the right process

Grating, panels and tanks get the material and finish matched to wash-down and food-grade duty.

Materials

  • Fibreglass (E-glass): Tough, Corrosion-Proof and Hygienic.

  • Vinyl Ester Resin: Extra Acid, Brine and Chemical Resistance.

  • Gelcoat Finishes: Smooth, Sealed, Food-Safe Surfaces.

  • Anti-Slip Topping: Gritted Surface for Safe Footing.

Processes

  • Moulded Grating: Non-Slip, Free-Draining Floors.

  • Tank Fabrication: Storage, Mixing and Process Vessels.

  • Custom Fabrication: Cut and Built to Your Plant Layout.

  • In-House Tooling: Moulds and Patterns Made and Held on Site.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so a food and beverage project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so a food and beverage project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// Quality & assurance

Made to your specification

A single point of accountability from first drawing to finished part, with the work kept in Australia.

  • Australian Owned: Owned and Operated in Australia, Manufacturing Locally in Adelaide.

  • In-House Control: Design, Tooling and Manufacture under One Roof, with One Team Accountable.

  • To Your Standard: Built to Your Drawings, Specification and the Standards Your Program Requires.

  • Prototype To Production: From a Single Proof-of-Concept Part Through to an Ongoing Production Run.

// Start here

Got a drawing?

Let’s make it.

Talk to the workshop

08 8345 2299