// Industries / Transport

Transport Fibreglass

Transport Fibreglass

Transport fibreglass for transport and rail, from station panels and rolling-stock interiors to ducting, platform componentry and durable signage.

Fibreglass Panels · Rolling Stock · Lightweight

1999

Established

Australian

Owned & operated

In-house

Design to delivery

1–1000s

Prototype to production

At a glance

  • Sector: Transport & Rail

  • Applications: Panels, Ducting, Platforms

  • Materials: Fibreglass, Hybrids

  • Processes: Moulding, Infusion

  • Finish: Durable, Low-Maintenance

// Capability

Transport fibreglass, end to end

We supply and manufacture transport fibreglass for transport and rail, built light, tough and low-maintenance for stations and vehicles.

Transport assets need parts that are light, tough and low-maintenance. Transport fibreglass trims weight from stations and rolling stock, resists vandalism and weather, and moulds into the shapes that station fit-outs and vehicle bodies need.

Built to suit your project

As an Australian owned manufacturer based in Adelaide, we handle design, tooling and manufacture in-house and hold it to schedule, from a single panel through to a full station or fleet program.

// What we make

Transport fibreglass, and more

Transport fibreglass for stations and rolling stock, plus the ducting and platform componentry that goes with it.

Station panels

01

Fibreglass wall, ceiling, platform and canopy panels for stations and interchanges, in any colour or finish you choose, inside and out.

Rolling-stock parts

02

Interior panels, linings, seating and componentry for trains, trams, light rail and other rail vehicles of every kind.

Ducting

03

Ducting, ventilation and service componentry that resists vibration, weather and constant daily use for years.

Body panels & signage

04

Bus and truck body panels, bumpers, fairings and durable signage built to take constant use and impact on the road.

// What we make

Transport fibreglass, and more

Transport fibreglass for stations and rolling stock, plus the ducting and platform componentry that goes with it.

Station panels

01

Fibreglass wall, ceiling, platform and canopy panels for stations and interchanges, in any colour or finish you choose, inside and out.

Rolling-stock parts

02

Interior panels, linings, seating and componentry for trains, trams, light rail and other rail vehicles of every kind.

Ducting

03

Ducting, ventilation and service componentry that resists vibration, weather and constant daily use for years.

Body panels & signage

04

Bus and truck body panels, bumpers, fairings and durable signage built to take constant use and impact on the road.

// Why composites

Why fibreglass in transport

Transport fibreglass does four things metal cannot.

Lightweight

Less weight means lower energy use and more payload capacity on every run.

Durable

Resists vandalism, vibration, impact and the weather, day in, day out.

Mouldable

Complex panel and interior shapes moulded in one seamless piece.

Low maintenance

No rust or rot across the full service life of the asset, with minimal upkeep.

// Materials & methods

The right material, the right process

Panels get the material and finish matched to the duty, from interior linings to weatherproof external panels.

Materials

  • Fibreglass (GRP): Tough, Weatherproof and Mouldable.

  • Vinyl Ester Resin: Added Weather and Chemical Resistance.

  • Phenolic Options: Fire-Rated Panels Where Required.

  • Hybrid Laminates: Blended Fibres Tuned to the Part.

Processes

  • Open & Closed Moulding: Panels, Shells and Componentry.

  • Vacuum Infusion: Consistent Structural Laminates.

  • Custom Fabrication: Cut, Bonded and Built to Your Design.

  • In-House Tooling: Moulds and Patterns Made and Held on Site.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so a transport project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so a transport project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// Quality & assurance

Made to your specification

A single point of accountability from first drawing to finished part, with the work kept in Australia.

  • Australian Owned: Owned and Operated in Australia, Manufacturing Locally in Adelaide.

  • In-House Control: Design, Tooling and Manufacture under One Roof, with One Team Accountable.

  • To Your Standard: Built to Your Drawings, Specification and the Standards Your Program Requires.

  • Prototype To Production: From a Single Proof-of-Concept Part Through to an Ongoing Production Run.

// Start here

Got a drawing?

Let’s make it.

Talk to the workshop

08 8345 2299