// Industries / Oil & Gas Fibreglass

Oil & Gas Fibreglass

Oil & Gas Fibreglass

Oil and gas fibreglass for petrochemical sites, from chemical-resistant flooring and grating to tanks, pipework and containment, built for aggressive, high-risk plants.

Oil & Gas Fibreglass · Chemical Resistant · Petrochemical

1999

Established

Australian

Owned & operated

In-house

Design to delivery

1–1000s

Prototype to production

At a glance

  • Sector: Oil, Gas & Petrochemical Fibreglass

  • Applications: Flooring, Grating, Tanks

  • Materials: Vinyl Ester, Glass

  • Processes: Moulded & Pultruded

  • Finish: Non-Slip, Chemical-Proof

Oil & Gas Fibreglass

// Capability

Oil and gas fibreglass, end to end

We supply and manufacture fibreglass for oil and gas and petrochemical sites, built for aggressive chemicals, weather and high-risk duty.

Hydrocarbon and petrochemical sites attack materials with fuels, acids and constant weather. Oil and gas fibreglass does not corrode, stays non-slip and resists the chemistry that strips coated steel, from flooring and grating through to tanks, pipework and containment.

Built to suit your site

As an Australian owned manufacturer based in Adelaide, we handle design, fabrication and manufacture in-house and hold it to schedule, from a single area through to a full plant fit-out.

// What we make

Oil and gas fibreglass, and everything around it

Oil and gas fibreglass for process areas, plus the grating, tanks and containment that go with it.

Chemical-resistant flooring

01

Non-slip vinyl-ester flooring and grating for process, bunded and wash-down areas across the whole site, indoors and out.

Pit & tank covers

02

Chemical storage tanks, process pipework, ducting and stacks in corrosion-proof, chemical-resistant GRP that lasts for years.

Tanks & weirs

03

FRP grating, walkways, handrails and platforms across process, tank and loading areas, indoors and out.

Handrails & access

04

Bunding, containment and blast-protection structures for high-risk and hazardous process and storage areas.

// What we make

Oil and gas fibreglass, and everything around it

Oil and gas fibreglass for process areas, plus the grating, tanks and containment that go with it.

Chemical-resistant flooring

01

Non-slip vinyl-ester flooring and grating for process, bunded and wash-down areas across the whole site, indoors and out.

Pit & tank covers

02

Chemical storage tanks, process pipework, ducting and stacks in corrosion-proof, chemical-resistant GRP that lasts for years.

Tanks & weirs

03

FRP grating, walkways, handrails and platforms across process, tank and loading areas, indoors and out.

Handrails & access

04

Bunding, containment and blast-protection structures for high-risk and hazardous process and storage areas.

// Why composites

Why fibreglass beats steel on site

Oil and gas fibreglass earns its place on hazardous sites for four reasons steel cannot match.

Chemical-resistant

Stands up to fuels, acids and process chemicals that strip steel.

Non-conductive

Safe around electrical and ignition hazards on site.

Non-slip

Safe footing in wet, oily and greasy process areas.

Durable

Long service life with minimal corrosion maintenance.

// Materials & methods

The right material, the right process

Flooring and componentry get the resin matched to the chemistry, with anti-slip surfaces and fire-rated options where required.

Materials

  • Vinyl Ester Resin: Strong Acid, Fuel and Chemical Resistance.

  • Fibreglass (E-glass): Tough, Corrosion-Proof Structure.

  • Phenolic Options: Fire-Rated Systems Where Required.

  • Anti-Slip Topping: Gritted Surface for Safe Footing.

Processes

  • Moulded Grating: Non-Slip, Free-Draining Floors.

  • Solid Plate & Panel: Sealed, Chemical-Proof Surfaces.

  • Custom Fabrication: Cut and Built to Your Plant Layout.

  • In-House Tooling: Moulds and Patterns Made and Held on Site.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so an oil and gas project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

// How we work

Design through to delivery

Every step under one roof in Adelaide, so an oil and gas project moves from drawing to finished fibreglass without the gaps that come from outsourcing.

Design & layout

01

Site measure, engineering and layout alongside your team.

Tooling & moulds

02

Patterns and moulds built and held in-house, ready to reuse.

Manufacture

03

Moulded and pultruded grating and parts to tight tolerances.

Finishing & install

04

Cutting, fabrication, fittings and install-ready delivery.

Oil & Gas Fibreglass

// Quality & assurance

Made to your specification

A single point of accountability from first drawing to finished part, with the work kept in Australia.

  • Australian Owned: Owned and Operated in Australia, Manufacturing Locally in Adelaide.

  • In-House Control: Design, Tooling and Manufacture under One Roof, with One Team Accountable.

  • To Your Standard: Built to Your Drawings, Specification and the Standards Your Program Requires.

  • Prototype To Production: From a Single Proof-of-Concept Part Through to an Ongoing Production Run.

// Start here

Got a drawing?

Let’s make it.

Talk to the workshop

08 8345 2299